PRODUCTS
PREFAB HOUSE
Indonesia forests are suffering from damage that is covering 3.8 million acres each year from 1998 to 2000, and increases in subsequent years. Since 1995, Java has experienced deficit as 32.3 billion cubic meters water annually. From 1998 to 2003, there were over 650 disasters in Indonesia that claimed more than 2,500 lives and material losses of more than 300 billion dollars, of which 85% is flood disaster and landslides as a result of environmental damage.
PREFAB HOUSE
Pre-fabricated house was first introduced in Indonesia by PT. Jaindo Metal Industries.
Pre-fabricated house is:
- Home that its components are made in the factory.
- It is then transported to the installation location and at this location that components compiled into a building and then equip it with living utilities and finishes.
- Can be quickly built anywhere, either urban location or locations that are difficult to reach.
- A new breakthrough in the construction of modern houses
- The advantage is on the materials used and the process is much shorter compared to the development process in the conventional house.
- Suitable to use in areas that are far from the city, and places that require quick development or to post-disaster.
Advantages:
- Easily Transported.
- Easy and quickly built.
- The construction process is not affected to weather.
- Less wasted material.
- Labor-Saving.
- Precision in dimensions.
- Recyclable Materials.
- Earthquake Resistant.
- More Environmental Friendly.
- Lightweight Building.
- Does not require a great Foundation.
KATALOG PRODUK
ROOFING & CLADDING
Advantages of Jsteel Corrugated Metal Sheet:
- Able to be colored so it gains a better outlook result. Standard color (show Jaindo colors) or consumer requested colors are applicable.
- Can use materials FRP (Fiberglass Reinforce Plastic) with the same type of roofing profiles.
- Special Accessories such as Fastening which is equipped with a special Ring for roofing types, except Toplock (Boltless using Fixing Strap as the straps). Nok which is equipped with Flashing Ridge to hold heavy rain and wind.
Material:
- Alu Zinc {Aluminum Zinc Alloy Coated}/Galvalume (AZ-150).
- STUCCO EMBOSSED ALUMINUM.
In addition to natural color (without finishing), color coating can also be given to materials above, either standard color or special color (consumer desires).
ROOFING & CLADDING PROFILE
- (USR) Unico Single Rib
- LT-7 (ULR-7)
- Spanroof
- Toplock
KEY STONE PLATE
- Multi Ribs
- New Supersheet/Superdeck
- Keystone Plate Tipe (New UKS)
ASESORIS & PENGIKAT
ROOF TRUSS
Roof Truss Profiles
The three forms of profile may optimize its usage.
Guarantee:
- Structure
- Materials
- Installation
Jaindo Software Research
Using the Jaindo Research software with calculation base refers to Cold Form Steals Design AISI standard (American Iron Steel & Institute).
Software and lightweight steel roof truss system has earned the recommendation of HAKI (Himpunan Ahli Konstruksi), which has fulfilled the minimum requirements for earthquake resistant frame roof structure planning in Indonesia.
CEILING FRAME
CEILING FRAME
The main advantages of the Ceiling Frame is
- Avoid from the loss due to termites.
- Easy installation, because the assortment of supporting accessories are available.
- Use one type of profiles for the 2 function Metal Top, Cross and Furing.
- Structure of the test have been done to the profile and the structure intact.
PARTITION FRAME
PARTITION FRAME
Non Bearing Wall System, baffle wall framework, can use Non Bearing Wall System because it serves only to divide the room only.
SPECIFICATIONS:
C-STUD &U- TRACK
Function: Partition Space = Non-Load Bearing Wall
MATERIAL:
Galvalume AZ-100
t = 0.45 mm TCT
WINDOW & DOOR FRAME
Galvanized steel frame for the door and windows, manufactured from the best materials through processes that modern & accurately. Kuzenku uses standard Galvanized ASTM A 527 that is comparable to JIS G 2428, Kuzenku is given a touch of Brown and white with Powder Coating System. Kuzenku can be used for doors and Windows that reflect the elegant impression and also beautiful but economically.
TYPE KUSEN :
RIDGE VENTILATOR
UNICO RIDGE VENTILATION
Unico Ridge Ventilator (URV) is made of aluminum and AluZinc. Advantageously it does not require operational costs, maintenance and electrical power. In its operation, it requires the difference between indoor and outdoor air pressure. Basically, the indoor hot air pressure tends to rise up and will accumulate on the rooftop.
The Principle :
Hot air tends to gather on the upper area of the building. The heat takes place on the roof due to the sun heating makes the air looks for loopholes to get out, it is necessary to the existence of URV. This can occur if all of the well at the bottom of the building there is a replacement air from outside. URV is suitable for buildings that need air circulation, not stuffy, fresher and not humid, making it suitable for warehouses, factories and multipurpose building.
Profile :
Width of The Opening :
LOUVER
LOUVER
Louver door (Louver) non standard products, thus has an advantage in its creation. Due to the size and dimensions, it is adaptable to the needs on the field. In addition, it can be used as a vent, it can also be created as building façade variation, because it must be given the interesting colors and unique so it beautify the building. Standard louvre material is using Galvanized and AluZinc or Galvalume, Zincalume or combination of both adjusted to the dimensions of length and width. For finishing color can use Prepainted material and or acrylic 2 face painting.
Type 1 :
Type 2 :
RETAIL
Retail Products
Mass products that have been tested and passed through several generations. Simple but sturdy is the advantage of retail products PT. Jaindo Metal Industries. Options for standard and special needs, such as for warehouses, workshops, etc. However, if there is an order and a special request, a special length size for the order can be attempted to make it. Likewise with color, because the standard color is Natural Grey.
MATERIALS INFO
CORROSION PROTECTIVE COATING MATERIALS
3 rust protective coating material options & warranty
-
1.
MG COT
Zinc – Al 6% & Mg 2% -
2.
Galvalume
43.5% Zinc – 55% Aluminum – 1.5% Silicone, AZ-150 ( 150 gr/m2 ) -
3.
ZAM ( Zinc - Aluminium - Magnesium )
Zinc – Al 6% & Mg 3%, DA-90
-
MG COT
Zinc – Al 6% & Mg 2% -
Galvalume
43.5% Zinc – 55% Aluminum – 1.5% Silicone, AZ-150 ( 150 gr/m2 ) -
ZAM ( Zinc - Aluminium - Magnesium )
Zinc – Al 6% & Mg 3%, DA-90
BAHAN BAKU G - 550 MEMENUHI PERSYARATAN SALAH SATU STANDAR INTERNASIONAL
PRODUCTS
PREFAB HOUSE
Indonesia forests are suffering from damage that is covering 3.8 million acres each year from 1998 to 2000, and increases in subsequent years. Since 1995, Java has experienced deficit as 32.3 billion cubic meters water annually. From 1998 to 2003, there were over 650 disasters in Indonesia that claimed more than 2,500 lives and material losses of more than 300 billion dollars, of which 85% is flood disaster and landslides as a result of environmental damage.
PREFAB HOUSE
Pre-fabricated house was first introduced in Indonesia by PT. Jaindo Metal Industries.
Pre-fabricated house is:
- Home that its components are made in the factory.
- It is then transported to the installation location and at this location that components compiled into a building and then equip it with living utilities and finishes.
- Can be quickly built anywhere, either urban location or locations that are difficult to reach.
- A new breakthrough in the construction of modern houses
- The advantage is on the materials used and the process is much shorter compared to the development process in the conventional house.
- Suitable to use in areas that are far from the city, and places that require quick development or to post-disaster.
Advantages:
- Easily Transported.
- Easy and quickly built.
- The construction process is not affected to weather.
- Less wasted material.
- Labor-Saving.
- Precision in dimensions.
- Recyclable Materials.
- Earthquake Resistant.
- More Environmental Friendly.
- Lightweight Building.
- Does not require a great Foundation.
KATALOG PRODUK
ROOFING & CLADDING
Advantages of Jsteel Corrugated Metal Sheet:
- Able to be colored so it gains a better outlook result. Standard color (show Jaindo colors) or consumer requested colors are applicable.
- Can use materials FRP (Fiberglass Reinforce Plastic) with the same type of roofing profiles.
- Special Accessories such as Fastening which is equipped with a special Ring for roofing types, except Toplock (Boltless using Fixing Strap as the straps). Nok which is equipped with Flashing Ridge to hold heavy rain and wind.
Material:
- Alu Zinc {Aluminum Zinc Alloy Coated}/Galvalume (AZ-150).
- STUCCO EMBOSSED ALUMINUM.
In addition to natural color (without finishing), color coating can also be given to materials above, either standard color or special color (consumer desires).
ROOFING & CLADDING PROFILE
- (USR) Unico Single Rib
- LT-7 (ULR-7)
- Spanroof
- Toplock
KEY STONE PLATE
- Multi Ribs
- New Supersheet/Superdeck
- Keystone Plate Tipe (New UKS)
ASESORIS & PENGIKAT
ROOF TRUSS
Roof Truss Profiles
The three forms of profile may optimize its usage.
Guarantee:
- Structure
- Materials
- Installation
Jaindo Software Research
Using the Jaindo Research software with calculation base refers to Cold Form Steals Design AISI standard (American Iron Steel & Institute).
Software and lightweight steel roof truss system has earned the recommendation of HAKI (Himpunan Ahli Konstruksi), which has fulfilled the minimum requirements for earthquake resistant frame roof structure planning in Indonesia.
CEILING FRAME
CEILING FRAME
The main advantages of the Ceiling Frame is
- Avoid from the loss due to termites.
- Easy installation, because the assortment of supporting accessories are available.
- Use one type of profiles for the 2 function Metal Top, Cross and Furing.
- Structure of the test have been done to the profile and the structure intact.
PARTITION FRAME
PARTITION FRAME
Non Bearing Wall System, baffle wall framework, can use Non Bearing Wall System because it serves only to divide the room only.
SPECIFICATIONS:
C-STUD &U- TRACK
Function: Partition Space = Non-Load Bearing Wall
MATERIAL:
Galvalume AZ-100
t = 0.45 mm TCT
WINDOW & DOOR FRAME
Galvanized steel frame for the door and windows, manufactured from the best materials through processes that modern & accurately. Kuzenku uses standard Galvanized ASTM A 527 that is comparable to JIS G 2428, Kuzenku is given a touch of Brown and white with Powder Coating System. Kuzenku can be used for doors and Windows that reflect the elegant impression and also beautiful but economically.
TYPE KUSEN :
RIDGE VENTILATOR
UNICO RIDGE VENTILATION
Unico Ridge Ventilator (URV) is made of aluminum and AluZinc. Advantageously it does not require operational costs, maintenance and electrical power. In its operation, it requires the difference between indoor and outdoor air pressure. Basically, the indoor hot air pressure tends to rise up and will accumulate on the rooftop.
The Principle :
Hot air tends to gather on the upper area of the building. The heat takes place on the roof due to the sun heating makes the air looks for loopholes to get out, it is necessary to the existence of URV. This can occur if all of the well at the bottom of the building there is a replacement air from outside. URV is suitable for buildings that need air circulation, not stuffy, fresher and not humid, making it suitable for warehouses, factories and multipurpose building.
Profile :
Width of The Opening :
LOUVER
LOUVER
Louver door (Louver) non standard products, thus has an advantage in its creation. Due to the size and dimensions, it is adaptable to the needs on the field. In addition, it can be used as a vent, it can also be created as building façade variation, because it must be given the interesting colors and unique so it beautify the building. Standard louvre material is using Galvanized and AluZinc or Galvalume, Zincalume or combination of both adjusted to the dimensions of length and width. For finishing color can use Prepainted material and or acrylic 2 face painting.
Type 1 :
Type 2 :
RETAIL
Retail Products
Mass products that have been tested and passed through several generations. Simple but sturdy is the advantage of retail products PT. Jaindo Metal Industries. Options for standard and special needs, such as for warehouses, workshops, etc. However, if there is an order and a special request, a special length size for the order can be attempted to make it. Likewise with color, because the standard color is Natural Grey.
MATERIALS INFO
CORROSION PROTECTIVE COATING MATERIALS
3 rust protective coating material options & warranty
-
1.
MG COT
Zinc – Al 6% & Mg 2% -
2.
Galvalume
43.5% Zinc – 55% Aluminum – 1.5% Silicone, AZ-150 ( 150 gr/m2 ) -
3.
ZAM ( Zinc - Aluminium - Magnesium )
Zinc – Al 6% & Mg 3%, DA-90
-
MG COT
Zinc – Al 6% & Mg 2% -
Galvalume
43.5% Zinc – 55% Aluminum – 1.5% Silicone, AZ-150 ( 150 gr/m2 ) -
ZAM ( Zinc - Aluminium - Magnesium )
Zinc – Al 6% & Mg 3%, DA-90